CAME VER KIT Manual do Utilizador descarregar pdf (Página 13)

Micon Car Kit, Ver. 5.1Body Assembly Manual (Version for RX62T)

3. Universal Plate (Fashioning of Plate Parts)

This section describes how to make the plate pieces used to build the chassis of the micon car.

3.1. Contents of Universal Plate Set

The universal plate set includes the following items:

3.2. Making the Sensor Arms

In this section, we will make the sensor arms. You will need the two angle piece sets.

Use nippers to separate the parts of the two sets

of angle pieces.

 1 universal plate

 2 sets of angle pieces

 18 black screws

 18 nuts (used for temporary fastening when

fashioning the plates)

Note: Be careful not to lose any of the nuts, as

no extras are provided.

Parts needed in addition to angle pieces:

 2 nylon nuts (in separate bag)  2 black screws

Note: Be careful not to mix up the nylon nuts and regular

nuts. For comparison, a photo of regular nuts is

shown below:

Photo 3.2

uts

(not used in sensor arms)

Photo 3.3

Photo 3.1

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 91 92

Sem comentários

CAME VER KIT Manual do Utilizador Página 13