CAME VER KIT Manual do Utilizador descarregar pdf (Página 56)

Micon Car Kit, Ver. 5.1Body Assembly Manual (Version for RX62T)

8.2. Installing the Ceramic Capacitors (for Noise Suppression)

In this section we will install ceramic capacitors (0.01 μF) to absorb noise generated by the motors.

As shown in photos 8.43 and 8.44, attach two more ceramic capacitors for a total of three, feeding their leads

through the holes in the motor terminals.

Ceramic capacitors (0.01 μF)

Photo 8.41

Photo 8.42

Prepare six ceramic capacitors with “103” printed on

them. (There should be six unused ceramic capacitors

remaining after fabricating the motor drive board.)

Photo 8.43 Photo 8.44

Photo 8.45

Apply solder to the locations indicated by circles in

photo 8.45. Apply solder such that the capacitor leads

are as short at possible (photo 8.46). If the leads are

too long, the capacitors will not be very effective in

absorbing noise. For this reason, the leads should be

t as short as

ossible.

Photo 8.46

As shown in photo 8.42, feed the leads of a ceramic

capacitor through the holes in the motor terminals.

Use nippers to snip off the excess portion of the

capacitor leads, so the result looks as shown in photo

8.46.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 91 92

Sem comentários

CAME VER KIT Manual do Utilizador Página 56