CAME VER KIT Manual do Utilizador descarregar pdf (Página 57)

Micon Car Kit, Ver. 5.1Body Assembly Manual (Version for RX62T)

Finally, snip off the excess portion of the capacitor leads. Repeat the entire procedure for the other gearbox.

Photo 8.47 Photo 8.48

ext, we will solder the remaining capacitor leads,

shown in photo 8.47, to the side of the motor.

Photo 8.49 Photo 8.50

Photo 8.51

Photo 8.52

The outside of the motor is oxidized, making it difficult

for solder to adhere. It is therefore necessary to file the

oxidation away in the spots where solder will be

applied. File the spots on the outside of the motor that

will result in the shortest capacitor leads. The locations

to file are indicated by circles.

Apply solder the filed locations as shown in photo 8.49.

Since it takes a while for heat to transfer to the motor

surface, touch each filed area with the soldering iron for

about five seconds before flowing solder onto it.

As shown in photo 8.50, hold down the capacitor lead

with a screwdriver or the like. Then touch it with the tip

of the soldering iron to melt the solder and provide easy

adhesion. Try to keep the capacitor leads as short as

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 91 92

Sem comentários

CAME VER KIT Manual do Utilizador Página 57