CAME VER KIT Manual do Utilizador descarregar pdf (Página 52)

Micon Car Kit, Ver. 5.1Body Assembly Manual (Version for RX62T)

Add part C as indicated by the arrow in photo 8.21 and secure it in place with four tapping screws.

Note: Do not tighten the screws too far.

When the hole in the shaft indicated by the arrow in photo 8.23 is visible beyond the edge of the gearbox,

assembly of the gearbox for the left motor is complete. Also, please understand that is the gearbox for the left

motor.

8.1.2. Assembling the Gearbox for the Right Motor

Photo 8.21 Photo 8.22

Photo 8.23

32 mm

Prepare a rear wheel shaft. Slide the gear joint to a

position 32 mm from the end of the shaft and secure it

with the setscrew.

Photo 8.24 Photo 8.25

Insert the shaft into the gearbox as shown in photo

8.25. Insert the shaft such that ends A and B, as

indicated in photo 8.24, are positioned as indicated by

A and B in photo 8.25. Fit the hexagonal opening in

the orange gear over the gear joint.

Orange gear

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 91 92

Sem comentários

CAME VER KIT Manual do Utilizador Página 52