CAME VER KIT Manual do Utilizador descarregar pdf (Página 60)

Micon Car Kit, Ver. 5.1Body Assembly Manual (Version for RX62T)

(2)

(1)

Photo 8.63 Photo 8.64

Crimp section (2) with the crimping pliers at position

1.7L.

After section (2) is crimped the result should look as

shown in the photo. Make sure that the contact pin does

not come off when you pull on the electrical wire.

Photo 8.65 Photo 8.66

Crimp section (1) with the crimping pliers at position

1.7H.

After section (1) is crimped the result should look as

shown in the photo. Next, attach a contact pin to the

other electrical wire.

Black

Red

Black

Red

Bottom

Top

Photo 8.67 Photo 8.68

Insert the ends of the electrical wires, with the contact

pins attached, into an XH connector.

As shown in the photo, insert the red wire on the bottom

and the black wire on the top. Insert until the hook of

each pin connector reaches the point indicated by the

arrow.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 91 92

Sem comentários

CAME VER KIT Manual do Utilizador Página 60